EPOCYL PRODUCTS
Plate sleeve – EPOCYL
Bridge Sleeve – EPOCYL
Plate sleeve – EPOCYL
Plate sleeve made of epoxy-based composite material.
Resistant to aggressive solvents and high dimensional stability.
Total resistance
Resistance to aggressive solvents, total encapsulation, prevents solvent and moisture absorption.
Honeycomb Structure
The exclusive honeycomb structure provides an optimal balance between robustness, stability, and low weight.
Adhesion
Surface that allows optimal tape adhesion while also facilitating easy removal after printing.
Metal Notch
Starting from 6mm thickness.
Protection
Side faces protected with impact-resistant material.
Speed
Suitable for high-speed printing.
Optional internal protection
Metal protective ring on the notch side to prevent damage to the interior. (Thickness > 12mm)
Warranty
One year for manufacturing defects.
Technical Specifications
Tolerances: TIR ≤ 0.020mm (mounted on a mandrel with TIR ≤ 0.005mm) – Outer diameter +/- 0.02mm
Hardness: 75 – 80 shore D
Working temperature: 16°C – 40°C
Working pressure and flow rate: 6 – 8 bar and 12 liters/second
Available in wall thicknesses from 1.5mm to 150mm.
For larger sizes, please inquire.
Bridge Sleeve – EPOCYL
Bridge sleeve constructed with epoxy-based composite material.
It exhibits excellent dimensional stability and very low weight thanks to the honeycomb design developed for large thicknesses.
Total resistance
Resistance to aggressive solvents, total encapsulation, prevents solvent and moisture absorption.
Honeycomb Structure
The exclusive honeycomb structure provides an optimal balance between robustness, stability, and low weight.
Protection
Side faces protected with impact-resistant material.
Speed
Suitable for high-speed printing.
Easy assembly and disassembly
Optimal distribution of surface air that allows easy mounting/dismounting of the sleeves.
Smooth assembly
And good fixation to the mandrel.
Internal protection
Metal protective ring on the notch side to prevent damage to the interior.
Warranty
One year for manufacturing defects.
Technical Specifications
Tolerances: TIR ≤ 0.015mm (mounted on a mandrel with TIR ≤ 0.005mm) – Outer diameter +/- 0.015mm
Hardness: 75 – 80 shore D
Working temperature: 16ºC – 40ºC
Working pressure and flow rate: 6 – 8 bar and 12 liters/second
Available in wall thicknesses from 12mm to 150mm and in pneumatic or through-flow versions.
For larger sizes, please inquire.
Contact us
Please fill out the form below and we will contact you shortly.
Valentín Gomez 553, Villa Lynch, Buenos Aires, Argentina
+54 011 5217 2723
+54 9 11 5099 5259
ventas@kypsrl.com.ar